Paper airplane confidence intervals

As a demonstration of a confidence interval for a sample mean capturing a population mean I had the class throw paper airplanes from the second floor balcony. Three prior terms of data provided a population mean flight distance of 614 cm as measured perpendicular to the building.


Each section threw their airplanes and then I measured the perpendicular flight distances. Measuring and picking up tasks were assisted by the students.


Throwing an aircraft.


Measuring distances.


Recording data.


Fetching airplanes.


The data was put on the board and the 95% confidence interval was calculated for each section.

Distances in cmm08m09m10all time
lower bound on the mean469275330536
upper bound on the mean940704681644
pop mean614614614590

Each section captured the population mean. The sections are all less than 30 students, so this exercise provides a vehicle for introducing the t-critical value and the TINV function in spreadsheets. Google Docs does not include the TINV function, those values were generated in LibreOffice.org Calc for this exercise. The data from this fall will lower the population mean to 590 cm in future terms.

The students watch the measurement process. 

This term an impending off-island trip caused me to accelerate the syllabus into section 10.1, confidence interval hypothesis testing. As I was going to be gone the next week, and the students would be working on worksheets that included running sample against sample, I modified my 10.1 coverage to include sample on sample confidence interval hypothesis testing. This material is not in the text. The week went exceedingly well actually. The FiboBelly exercise begun the prior Friday led to confidence intervals for the sample mean FiboBelly ratio that did not include the Fibonacci ratio of 1.618. The paper airplane confidence intervals for the sample mean did include the pre-existing population mean distance. Those two examples provided examples of when the sample data supports the population mean or fails to support the population mean. 

Sample on sample examples have, at a beginner's level, three possible outcomes. If the confidence intervals do not overlap at all, then the difference is significant. If each confidence interval overlaps the other mean, then the difference is not significant. If the confidence intervals overlap but not sufficiently to include the other mean, or only one overlaps the other mean, then the result is effectively indeterminate. Note that this really only makes sense for small samples - large samples can generate significant differences even when the effect size is small. 

Comments

Post a Comment

Popular posts from this blog

Plotting polar coordinates in Desmos and a vector addition demonstrator

Image
In an earlier post I noted that Desmos did not directly plot polar coordinates. Not only was I incorrect, but Desmos responded to my blog to correct me! Although I had at some point seen that one could define a function f(x)=3x+5 and then have Desmos calculate f(6), I had not absorbed how this might be used to plot polar coordinates. The above works beautifully . Realizing that I could effectively program Desmos, I applied this thinking to demonstrating how to add two vectors when given the magnitudes m and the direction angles theta. The graph calculates the i and j components for the two vectors and then adds the vectors, graphically displaying the result while also providing information on the magnitude and direction of the vector sum. m1 and theta1 are the magnitude and direction angle for one of the two vectors, m2 and theta2 are the magnitude and direction for the other vector. All four are dynamically interactive and can be changed. The diagram purports to illustra...
Read more

Traditional food dishes of Micronesia

Image
Clara, Jennette, and Joanie presented ground hard taro cooked in an umw, effectively a hot rock oven. Pohnpeian: rotama. Pingelapese: sero. Mwoakillese: rodma. Mortlockese: Amahd. Kosrae: rodoma. After cooking in an umw the rotama is pounded with the petiole of a palm frond. Rotama is made from hard or swamp taro, known as mwahng on Pohnpei, mweian on Pingalap, pula in Mortlockese, and pahsruhk on Kosrae. In traditional times on the outer islands the women had primary responsibility for tending the taro while the men handled fishing and climbing tasks. Joesen and Noeleen presented fermented breadfruit from the outer islands of Yap such as Woleai and Eauripik. The raw ingredients were actually brought in from Yap, Noeleen prepared the maare.  The leaf wrap is ti leaf - Cordyline fruticosa. Pauleen, Barnson, Trisha, Verginia, Con-ray, and Maylanda from Kitti, Pohnpei brought in mahi umw, koahpnoair koakihr, and uht sukusuk. Above is breadfruit umw, mahi umw, o...
Read more

Setting up a boxplot chart in Google Sheets with multiple boxplots on a single chart

Image
The  Google Statistics  add-on for Google Sheets can display multiple boxplots in a single chart. The key is the layout of the data. One column should be the variable by which the data is to be grouped, the other column should be the data to be box plotted. Set up the Statistics add-on with the data to be plotted as the variable, and the grouping column as the "by" variable. In this image I had deselected all but the boxplot option, the result was the appearance of the Moment, Standard errors, and Confidence intervals options. The default is apparently a 95% confidence interval for the mean. The result is multiple boxplots on a single chart with a common scale. The new tab that is created also quotes 95% confidence intervals for the mean. Note that as of 2018 the Google Statistics add-on cannot be found by search in the add-ons. In addition, as of May 2018 the add-on no longer verifies, possibly due to the add-on not having been updated since August 2017. One may ha...
Read more