Speed of Sound

In laboratory nine the physical science class synched clapping boards to echo arrivals to generate data that leads to measuring the speed of sound. Distances were measured using our most accurate GPS unit.

 
Jeanda with the GPS

The class began with a determination of the dry bulb (32°C at 11:00) and wet bulb (28°C) temperatures. Using the tables from section 8.1, the relative humidity was determined to be 74%. The class was later instructed to use WolframAlpha to determine the theoretic speed of sound in air. The value that I learned long years ago in school is about 20 m/s slower than the usual sound speed on Pohnpei, due primarily to temperature. On a crisp fall day in the midwestern United States the text book value of 330 m/s is fairly accurate. On Pohnpei sound never moves that slowly.

 
Marie claps the boards in front of the LRC

The data at 8:00 was closer to the estimated speed of sound of 347 m/s. By the 11:00 class the speed of sound would have been 350 m/s.

  
Tracy claps

The 8:00 class had a linear estimate of 339 m/s, only 2.3% below the expected value. The 11:00 class was 19% below the expected value with a linear estimate of 285 m/s.

 
Ryan times the clapping

A meta-study suggests that the 8:00 class is consistently closer to the correct value for the speed of sound than the 11:00 sections.The consistently lower sound speed values at 11:00 mean that the section is consistently clapping too slowly. One could argue that the midday sun and heat causes some form of lethargy, but I am aware of this differential and even with that awareness the speed came in too low. I know that 11:00 has a history of reporting to low a speed, but in the field I cannot see what is going consistently wrong.

Comments

Post a Comment

Popular posts from this blog

Plotting polar coordinates in Desmos and a vector addition demonstrator

Image
In an earlier post I noted that Desmos did not directly plot polar coordinates. Not only was I incorrect, but Desmos responded to my blog to correct me! Although I had at some point seen that one could define a function f(x)=3x+5 and then have Desmos calculate f(6), I had not absorbed how this might be used to plot polar coordinates. The above works beautifully . Realizing that I could effectively program Desmos, I applied this thinking to demonstrating how to add two vectors when given the magnitudes m and the direction angles theta. The graph calculates the i and j components for the two vectors and then adds the vectors, graphically displaying the result while also providing information on the magnitude and direction of the vector sum. m1 and theta1 are the magnitude and direction angle for one of the two vectors, m2 and theta2 are the magnitude and direction for the other vector. All four are dynamically interactive and can be changed. The diagram purports to illustra...
Read more

Traditional food dishes of Micronesia

Image
Clara, Jennette, and Joanie presented ground hard taro cooked in an umw, effectively a hot rock oven. Pohnpeian: rotama. Pingelapese: sero. Mwoakillese: rodma. Mortlockese: Amahd. Kosrae: rodoma. After cooking in an umw the rotama is pounded with the petiole of a palm frond. Rotama is made from hard or swamp taro, known as mwahng on Pohnpei, mweian on Pingalap, pula in Mortlockese, and pahsruhk on Kosrae. In traditional times on the outer islands the women had primary responsibility for tending the taro while the men handled fishing and climbing tasks. Joesen and Noeleen presented fermented breadfruit from the outer islands of Yap such as Woleai and Eauripik. The raw ingredients were actually brought in from Yap, Noeleen prepared the maare.  The leaf wrap is ti leaf - Cordyline fruticosa. Pauleen, Barnson, Trisha, Verginia, Con-ray, and Maylanda from Kitti, Pohnpei brought in mahi umw, koahpnoair koakihr, and uht sukusuk. Above is breadfruit umw, mahi umw, o...
Read more

Setting up a boxplot chart in Google Sheets with multiple boxplots on a single chart

Image
The  Google Statistics  add-on for Google Sheets can display multiple boxplots in a single chart. The key is the layout of the data. One column should be the variable by which the data is to be grouped, the other column should be the data to be box plotted. Set up the Statistics add-on with the data to be plotted as the variable, and the grouping column as the "by" variable. In this image I had deselected all but the boxplot option, the result was the appearance of the Moment, Standard errors, and Confidence intervals options. The default is apparently a 95% confidence interval for the mean. The result is multiple boxplots on a single chart with a common scale. The new tab that is created also quotes 95% confidence intervals for the mean. Note that as of 2018 the Google Statistics add-on cannot be found by search in the add-ons. In addition, as of May 2018 the add-on no longer verifies, possibly due to the add-on not having been updated since August 2017. One may ha...
Read more